| Power supply | 10..40 Vdc, 19..28 Vac (@50..60 Hz) |
| Power consumption | 2,5 W |
| Isolation protection | 1.500 Vac a 3 vie |
| Precision | 0,01% |
| LED | Power supply Error Tx Data Rx Data |
| Connections | Screw terminal block for 2.5 mm² cross-section MicroUSB port |
| Interfaces | RS485 2-wire, 115,200 bps |
| Protocol | ModBUS RTU slave |
| Input | 1 analog (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gages, 4 or 6-wire, 1 tare input |
| Output | 1 analog (0...20, 4...20 mA) or voltage (0..5, 0..10 V) output; 1 tare or alarm output |
| Input measurement | Sensitivity 1 to 64 mV/V |
| Resolution | 24 bit |
| Thermal drift | 25 ppm/K |
| Data | EEPROM for -40 years configuration |
| Programming | Software (Z-NET4) DIP-switch |
| Protection | IP20 |
| Assembly | 35 mm DIN guide rail DIN 46277 |
| Operating temperature | -10..+65°C |
| Dimensions (LxHxB) | 17.5x100x112 mm |
| Weight | 140 g |
| Housing | Nylon 6 filled 30% fiberglass |
| Standards | CE |
| Standards | EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131 |
Do you have a project in the design phase? Are you looking for measurement solutions tailored to your technical and regulatory requirements? Contact us to discuss your requirements or get a quote.
Our quality system is ISO 9001 and EN 9100 certified, guaranteeing controlled processes to meet industry standards.
In compliance with the main standards: DO 160, MIL-STD, AMS 2750, we guarantee optimum reliability in the most extreme environments.
Each component is identified by batch and serial number. We keep all material certificates and conformity documents for full traceability.
Français Français 
English
