Surface temperature sensors

PT100 / PT1000 screw-on surface - CAD

sonde-pt100-ou-pt1000-de-surface-a-fixer-dao-scaled-3.jpg

probe-pt100-ou-pt1000-de-surface-with-a-fixing-hole-dao-scaled-3.jpg

sonde-pt100-ou-pt1000-de-surface-etanche-with-a-fixing-hole-dao-scaled-3.jpg

PT100 or PT1000 mountable on housings or casings.

This sensor is designed to measure the temperature of a gas such as ambient air, or of a surface in small spaces. It is widely used to monitor heating phenomena (safety protocol).

Validation-tested on-board sensor.

Aeronautical qualification according to compliance matrix.

Sensitive element : PT100, PT1000
Operating range (sensitive element) : -70°C to +400°C
Wire temperature resistance : -40°C to +130°C
Case dimensions 30 x 8 x 5 mm

Miniature tension/compression sensor (M6) - FTCP3024

Miniature force transducers

Ref. number: FCTP3024

Compression transducer for clamping measurement - FC FMT

Compression force transducers

Cat. no.: FC FMT following FP3404

pressure-sensor-miniature-in-titanium-with-m5-connector-in-non-amplified-version-scaled-6.jpg

Pressure transmitter - PM4

Miniature pressure transducers

Ref.: P M4 - FP 4202

Bi-axis inclinometer - ANG130

Tilt and angle measurement

Reference: '-ANG130 following FP4228 Rev A

Single-axis inclinometer -ANG120

Tilt and angle measurement

Ref.: '-ANG 120 following FP4227 rev A

Non-contact laser position measurement up to 2000mm - LDS

Linear displacement, velocity and position measurement

Ref.: '-LDS according to FP4231 rev A

High resolution cable sensor 400 to 1200mm -DEPFILAWP-HR

Linear displacement, velocity and position measurement

Cat. no.: '-DEPFILAWP-HR following FP4224 rev A

Potentiometric / analog cable sensor, stroke 100 to 1200mm -DEPFILAWP

Linear displacement, velocity and position measurement

Cat. no.: '-DEPFILAWP following FP4223 REV A

Double linear measuring wheel - ROUECOD2

Linear displacement, velocity and position measurement

Ref.: '-ROUECOD2 following FP4222 rev A

Linear measuring wheel -ROUECOD

Linear displacement, velocity and position measurement

Reference: '-ROUECOD following FP 4221

Rotary displacement transducer -LTP

Linear displacement, velocity and position measurement

Ref.: '-LTR following FP4230 rev A

Miniature compression transducer with mounting screw - FC2068

Compression force transducers

Cat. no.: FC2068 following FP4204 rev A

Ultra miniature compression transducer - FC200R

Compression force transducers

Cat. no.: FC200R as per 4216 Rev A data sheet

Analog potentiometric displacement sensor -LTR Measurement from 10 to 150mm

Linear displacement, velocity and position measurement

Cat. no.: '-LTR following FP4229

Extremely low-load miniature force transducer - FTC300-S104

Miniature force transducers

Ref. number: FTC300 - S104 - FP4211 REV A

1526457170_digi-sense-digi-sense-thermocouple-velcro-strap-on-surface-probes-6493.jpg

Temperature sensor with Velcro® strap - SW

Pipe temperature sensors

Order no.: SW Velcro - FP 4029

Miniature combined pressure & temperature sensor - PABT

Miniature pressure transducers

Order no.: FP 801 - PABT series

Wave height transmitter - TDHM

Wave height measurement

Cat. no.: TDHM Next FP4207 A

10-channel data logger - GL3X

Data acquisition and recording units

Cat. no.: FP4209 ref A

8-channel acquisition unit - CEN

Data acquisition and recording units

Reference: FP 2636 - CEN

Miniature tension/compression force transducer with double thread - FTCP

Miniature force transducers

Ref. number: FTCP - FP3101

Miniature compression load cell with mounting screw - FC2068

Miniature force transducers

Order code: FP 4204 - FC 2068 series

Temperature/humidity/luminosity/location recorder with 4G data transfer

Combined humidity & temperature sensors

Order no.: FP4038 A

Wireless sensors can be remotely controlled via a web application

Other measured quantities

Order no.: FP4037 A

PT100 / PT1000 screw-on surface - CAD

Reference : DAO - FP 2607

Availability : tracked stock

Downloads :

Do you have a question about this product?

Need a customized solution?

Contact our sales team

Do you have a project in the design phase? Are you looking for measurement solutions tailored to your technical and regulatory requirements? Contact us to discuss your requirements or get a quote.

Certifications

Our quality system is ISO 9001 and EN 9100 certified, guaranteeing controlled processes to meet industry standards.

Compliance

In compliance with the main standards: DO 160, MIL-STD, AMS 2750, we guarantee optimum reliability in the most extreme environments.

Traceability

Each component is identified by batch and serial number. We keep all material certificates and conformity documents for full traceability.